Preventive vs reactive maintenance: what is the difference?
The short answer
Reactive maintenance means fixing things after they break. Preventive maintenance means servicing and inspecting them on a schedule so they are less likely to break in the first place. For anything important, safety-critical or expensive to stop, preventive is usually the better choice. For cheap, easily replaced items, reactive can be perfectly sensible.
Most teams use a mix, and the real question is how much of your week goes on emergencies. If it is most of it, you are probably in firefighting mode, and shifting even part of that work to planned maintenance can reduce breakdowns, stress and cost.
This guide explains both approaches, compares them, shows how to decide which assets get which treatment, and gives you a practical way to move towards planned work.
What is reactive maintenance?
Reactive maintenance, sometimes called breakdown maintenance or run-to-failure, means you act only when something has already stopped working or gone wrong. A light stops working, so you replace the bulb. A pump fails, so you call an engineer.
When it is acceptable
Reactive maintenance is a reasonable choice when:
- The item is cheap and easy to replace, such as a standard light bulb
- A failure does not affect safety, compliance or operations
- Checking or servicing it would cost more than the failure itself
- You have a spare ready, or a fast and cheap fix
The hidden costs
The problem is that reactive work often costs more than it first appears:
- Emergency call-outs and rush parts cost more than planned work.
- Downtime. A failed machine or system can stop work, close a room or disrupt customers.
- Knock-on damage. A small fault left alone can damage other parts.
- Safety and compliance risk. Missed checks on fire safety, electrical or gas equipment can have serious consequences.
- Stress and disruption. Teams pulled from planned jobs to deal with emergencies fall further behind.
- Shorter equipment life. Run-to-failure can wear equipment out sooner than regular servicing would.
For a worked example of these costs, see how planned maintenance saves money.
What is preventive maintenance?
Preventive maintenance (also called planned maintenance) means carrying out inspections, servicing and small repairs on a schedule, before something fails. The schedule can be based on:
- Time: every week, month, quarter or year
- Usage: every 500 running hours, or every 10,000 miles
Some examples:
| Setting | Example of preventive maintenance |
|---|---|
| Buildings | Annual boiler service, monthly fire alarm test, regular checks of emergency lighting |
| Water systems | Regular flushing and temperature checks as part of Legionella controls |
| Equipment | Lubricating bearings, replacing filters, checking belts |
| Vehicles | Scheduled servicing, tyre and brake checks, MOT reminders |
| Electrical | Periodic inspection and testing, and portable appliance checks |
The aim is to catch wear and small faults early, keep equipment working reliably, and meet any inspection or compliance duties. The trade-off is that it takes planning, and doing the checks costs time and money, so you need to focus on the assets where it pays off.
Preventive vs reactive: side by side
These are general patterns. The right balance depends on your assets and risks.
| Factor | Reactive | Preventive |
|---|---|---|
| When work happens | After something fails | On a schedule, before failure |
| Planning | Little | Needs a plan and a calendar |
| Cost per job | Often higher: emergency call-outs, rushed parts | Usually lower: planned time and parts |
| Upfront effort | Low | Higher: setup and regular checks |
| Downtime | Unplanned and often longer | Planned, at a convenient time |
| Safety and compliance | Higher risk of missed checks | Easier to prove checks were done |
| Equipment life | Can be shortened | Usually extended |
| Workload | Spiky and stressful | More even and predictable |
| Best for | Cheap, non-critical, easy-to-replace items | Important, safety-critical or costly assets |
| Records | Often patchy | Built up as a history of planned work |
When to use which
You do not need to service everything. A simple way to decide is to ask two questions about each asset:
- What happens if it fails? Does it affect safety, compliance, customers or operations?
- How costly is a failure compared with the cost of prevention? Think repair, replacement, downtime and disruption.
Then group your assets:
| Asset type | Approach | Examples |
|---|---|---|
| Critical: failure affects safety, compliance or stops operations | Preventive, with a strict schedule | Fire alarms, boilers, lifts, emergency lighting, key production equipment, water systems |
| Important: failure is costly or disruptive but not dangerous | Preventive, lighter schedule | HVAC, pumps, vehicles, kitchen equipment |
| Low impact: cheap and easy to replace | Reactive is fine | Standard bulbs, minor fittings, basic furniture |
Start with the critical group. That is where planned maintenance pays back fastest, and where proof of regular checks matters most. If you want help spotting when you have outgrown reactive habits, read 10 signs your business needs a CMMS.
How to move from reactive to preventive
You do not need to change everything at once. A gradual approach works better.
- Look at where your time goes. For a few weeks, note how many jobs are emergencies and which assets cause the most of them.
- List your critical assets. Use the two questions above to pick the 20 to 50 that matter most.
- Find out what servicing they need. Check manuals, supplier guidance and any legal or insurance requirements, plus what your engineers already do.
- Set frequencies. Turn each check into a recurring task: what to do, how often, who is responsible and roughly how long it takes. Our guide on how to build a preventive maintenance schedule walks through this step by step.
- Start with the most critical and the most repeated faults. Fixing a recurring breakdown with a simple regular check is a quick win.
- Make time for it. Planned work gets squeezed by emergencies, so put it in the diary and protect it.
- Record what you find. Notes and photos from each check build a history that shows what is wearing out.
- Review every quarter. Are breakdowns falling? Are any checks pointless? Adjust the schedule using real results.
As breakdowns fall, you gain time for more planned work, which is how teams escape the firefighting cycle. A week-by-week plan for setting up the system behind this is in How to implement a CMMS in 30 days.
How a CMMS helps with preventive maintenance
Preventive maintenance depends on remembering to do the right job at the right time, every time. That is hard to do reliably with memory, paper or a spreadsheet. A CMMS handles the parts that tend to slip:
- Recurring tasks create themselves. Set a task once, with its frequency, and the work order appears when it is due.
- Reminders reach the right person. Technicians get alerts for upcoming and overdue jobs, so nothing relies on someone checking a file.
- Checklists keep jobs consistent. Each task can carry the steps to follow, so the check is done the same way each time.
- Everything is recorded. The system logs who did the work, when, and what they found, which is the evidence inspectors and clients ask for.
- History shows patterns. You can see which assets keep failing and adjust the schedule.
- Overdue work is visible. Managers can see at a glance what has been missed.
If you are comparing systems, scheduling and reminders are among the essential items in CMMS features that actually matter. And if you are new to the software, start with What is a CMMS?
Frequently asked questions
Is preventive maintenance always better than reactive?
Not always. It is better for important, safety-critical or costly assets. For cheap, easily replaced items, waiting for failure can cost less than checking them regularly.
Is preventive maintenance the same as planned maintenance?
The terms are often used interchangeably. Planned maintenance is a broader term for any work you schedule in advance, and preventive maintenance is planned work aimed at preventing failures.
What about predictive maintenance?
Predictive maintenance uses condition data, such as vibration or temperature readings, to decide when work is needed. It can be powerful, but it needs good data and often sensors, so most small teams get more value from doing preventive maintenance consistently first. When you are ready, our guide to predictive maintenance for small businesses shows how to start with simple manual checks.
How much of my maintenance should be planned?
There is no single target. Many teams aim to reduce emergency work over time and increase planned work. Start by tracking the share of emergency jobs, and see it fall as your planned work grows.
Do I need software for preventive maintenance?
Not for a handful of assets. Beyond that, reminders, checklists and records are hard to keep reliable by hand. See CMMS vs spreadsheets for where spreadsheets begin to struggle.
Does preventive maintenance help with compliance?
It helps you carry out and record the regular checks that rules often require, such as fire safety, electrical, gas and water system checks. Check the exact requirements for your premises with the relevant guidance.
Final thoughts
Reactive maintenance will always have a place for low-impact items, but relying on it for the assets that matter most means paying more, stopping more and taking more risk. Start with your most critical assets, set simple recurring checks, and let the planned share of your work grow.